1.Our concrete admixture have advantage of :no chloride,good dispersion, water reduction and early-strength effect,good dispersion, water reduction and early-strength effect,without air entraining , no corrosion on steel bars , good compatibility with portland cement.
2.In concrete field,It can wide use in buildings,highway,mixing plant,bridges,dams,ports,and tunnels,electric power,water conservancy and civil engineering works, steam and nature conservation to system components. and so on.
3.When compounded with other admixtures,it’s appled in pumping concrete,curing concrete and others that have a special requirement.
4.It is suitable to make autotrophic concrete,steam curing concrete,steel concrete and prestress concrete.
5.In addition,it can use in dyeing,pesticide,leather this field.In addition,it can use in dyeing,pesticide,leather this field.

1.As the requirement of engineer,the dosage can be adjusted after testing.
2.It can be put into blender with mixing water.If it is added later or added before concrete pouring and is mixed for a moment,the plasticzing effect could be better.
3.High concentration product,the general recommended dosage powder is 0.4 to 1.0 percent.Generally the liquid is 1.0 to 2.5 percent.Low concentration products,the general recommended dosage powder is 0.5 to 1.2 percent.Generally the liquid is 1.2 to 3.0 percent.

Structural adhesive note glue process,finished products curing
1. Before note glue, first with surface protection tape cover the outer edge of glued area , to prevent contamination in these areas when scraping gum.
2. single-component structural silicone sealant can be directly used for manual or pneumatic gun , when used with pneumatic gun, adjust the operating pressure to prevent air bubbles when note glue.
3. Muzzle diameter must be smaller than the interface thickness, so that the muzzle extends into the depth of one-half of the interface. Muzzle should be moderately uniformly moving ,ensure full structural adhesive in interfaces , plastic injection should be prevented from moving too fast or reciprocating generating bubbles or holes.
4. After dispensing is complete, timely use a spatula make the extra structural adhesive inwardly compacted,so that structural adhesive in contact with the side of the interface, to help reduce internal air bubbles and holes, and to ensure structural adhesive with the full contact stick surface. Finally, the same direction make the interface surface smooth .
5. After trimming, the timely removal of surface protection ta marked with the date and number, horizontal conservation.
6. moving time again: under standard conditions, one-component curing of seven days, two-component curing 12 hours.
7.Completely cure time: standard conditions, one-component curing for 14 days, it's a two-component curing 7 days.

1.Main for structural bonding and assemble sealing of The glass curtain wall, stone (marble, granite)curtain wall,Aluminum curtain wall and metal structural engineering.
2. Suitable for glass docking, daylighting, hollow glass two bonded seal.
3. The tall buildings and industrial application of sealing and bonding.
4. Suitable for curtain wall engineering design with half hidden box or whole hidden frame and other kinds of buildings and industrial seals.
5.All kinds of doors and Windows installation gap filling sealing.
6.All kinds of interior decoration caulking seal.